Page 122 - DCAP104_EXPOSURE_TO_COMPUTER_DISCPLINES
P. 122

Unit 6: Data Communication



            standard was never expanded to allow for the making or receiving of arbitrary phone calls while   Notes
            the modem was in use, due to the cost of infrastructure upgrades to telephone companies, and
            the advent of ISDN and DSL technologies which effectively accomplished the same goal.
            Today, Multi-Tech is the only known company to continue to support a v.70 compatible modem.
            While their device also offers v.92 at 56kbps, it remains significantly more expensive than
            comparable modems sans v.70 support.
            6.3.1.8 Using Digital Lines and PCM (V.90/92)

            In the late 1990s Rockwell/Lucent and U.S. Robotics introduced new competing technologies
            based upon the digital transmission used in modern telephony networks. The standard digital
            transmission in modern networks is 64 kbit/s but some networks use a part of the bandwidth
            for remote office signaling (e.g., to hang up the phone), limiting the effective rate to 56 kbit/s
            DS0. This new technology was adopted into ITU standards V.90 and is common in modern
            computers. The 56 kbit/s rate is only possible from the central office to the user site (downlink).
            In the United States, government regulation limits the maximum power output, resulting in a
            maximum data rate of 53.3 kbit/s. The uplink (from the user to the central office) still uses V.34
            technology at 33.6 kbit/s.


                                    Figure 6.7: Modem Bank at an ISP






















            Later in V.92, the digital PCM technique was applied to increase the upload speed to a maximum
            of 48 kbit/s, but at the expense of download rates. For example a 48 kbit/s upstream rate would
            reduce the downstream as low as 40 kbit/s, due to echo on the telephone line. To avoid this
            problem, V.92 modems offer the option to turn off the digital upstream and instead use a 33.6
            kbit/s analog connection, in order to maintain a high digital downstream of 50 kbit/s or higher.
            V.92 also adds two other features. The first is the ability for users who have call waiting to put
            their dial-up Internet connection on hold for extended periods of time while they answer a call.
            The second feature is the ability to quickly connect to one’s ISP. This is achieved by remembering
            the analog and digital characteristics of the telephone line, and using this saved information to
            reconnect at a fast pace.

            6.3.1.9 Using Compression to Exceed 56k
            Today’s V.42, V.42bis and V.44 standards allow the modem to transmit data faster than its basic
            rate would imply. For instance, a 53.3 kbit/s connection with V.44 can transmit up to 53.3*6 ==
            320 kbit/s using pure text. However, the compression ratio tends to vary due to noise on the
            line, or due to the transfer of already-compressed files (ZIP files, JPEG images, MP3 audio, MPEG
            video). At some points the modem will be sending compressed files at approximately 50 kbit/s,
            uncompressed files at 160 kbit/s, and pure text at 320 kbit/s, or any value in between.



                                             LOVELY PROFESSIONAL UNIVERSITY                                   115
   117   118   119   120   121   122   123   124   125   126   127