Page 172 - DMGT525_MATERIALS_MANAGEMENT
P. 172

Unit 12: Stores Management




          well as grain and all other types of foodstuffs and materials. Made from thick rotproof butyl  Notes
          rubber laminate and heavy duty steel mesh. They are entirely portable allowing their use to be
          either or temporary and permanent they can be moved from one site to another in a matter of
          hours. An exceptional advantage is simplicity of operation and no mechanical loading aids need
          to be used unless desired.
          The stores are circular in shape, with an outer support wall made up to 7’–10’ high 5 gauge
          weldmesh. To the inside of this is secureda thick lining of butyl rubber laminate, which consists
          of 0.040" layer of black butyl rubber faced with a 0.010’ thick skin of white EPDM rubber bonded
          to it. This lining passes up and over the top of the side-wall, to which it is secured by a continuous
          clip/rim, and a 0.050" thick butyl rubber floor is bonded to the sidewalls.
          The effect is that of a giant bin, its diameter according to the specific model varying between
          38’0" and 68’0". The work/storage area inside the bin is not obstructed in any way, and in any
          way, and the roof/lid fitting over it, again made from thick butyl rubber laminate, is intended
          to be supported at the centre by the sacks actually being stored. At the sides, it is clipped to the
          rim of the sidewalls by clamps, which are tensioned by a simple strainer device and not only
          hold the lid firmly in place but also effectively seal the inside off from atmosphere.
          Sacks can be loaded into the store by various methods. Thus, a stairway  can be built up to the
          sidewall so that the sacks can be quickly passed into the store or a lorry can be backed up to the
          sidewall and sacks passed over from the vehicle tailboard. A third alternative is the use of a
          mechanical conveying system.


                 Example: For bulk materials the store can be loaded manually or mechanically. Once
          inside  the store,  sacks are  loaded from  the  centre  outwards,  higher  at the  middle up  to
          approximately 15’0" in the largest model and tapering towards the sides, the lid being conical in
          shape for this purpose.
          Since the storage is equally airtight and waterproof  bagged grain and other products can be
          safely stored for long periods.

          Self Assessment


          Fill in the blanks:
          14.  Dry Storing is a new development in ..........…………… practice in India.
          15.  The stores are suitable for storing any type of ..........…………… material, as well as grain
               and all other types of foodstuffs and materials.
          16.  The stores are ..........…………… in shape, with an outer support wall.

              


             Case Study  Store Management at ABC

                    BC company is a young growing organization with  a turnover  of over  `  200
                    crore. The company has a  central store  near the  factory, 7 regional stores  at
            Aimportant locations and 27 depots or storage points from where supply is made
            to the stockists who sell the company’s products. Its current stock holding is: ABC company
            is a young growing organization with a turnover of over ` 200 crore. The company has a
            central  warehouse near the factory, 7 regional warehouses at important locations and
                                                                                 Contd...



                                           LOVELY PROFESSIONAL UNIVERSITY                                   167
   167   168   169   170   171   172   173   174   175   176   177