Page 58 - DCAP601_SIMULATION_AND_MODELING

Simulation and Modelling

Notes 3.4 Summary

 Numerical integration methods like Runge Kutta, or Bulirsch-Stoer are used to elucidate
the system of ODEs.

 A servo control system is one of the most significant and extensively used forms of control
system. Any machine or part of equipment that has rotating parts will enclose one or
more servo control systems.
 The main use of a reservoir is to control a determined quantity of water during some
phase of time.

3.5 Keywords

Simul8: Standard is an incorporated environment for functioning with simulation models.
System: A system is an assemblage of interrelated parts that work together by way of some
driving process.

3.6 Self Assessment

Fill in the blanks:
1. The use of real equipment like the …………… Servo Trainer aids enormously to locate the
special features of the different techniques.

2. A continuous time technique or a …………… method based on Z transforms.
3. The water drawn from a reservoir is used at a much slower (and constant) rate than the rate
and constancy of the water flowing into the ……………

4. The term "Reservoir System Operations" points to the practice of …………… and supervising
a reservoir for multiple purposes, under dynamic conditions.
5. Reservoirs are operated depending on policies that engross …………… pools that are
defined to be used for dissimilar purposes.
6. The …………… control zone is to stay empty except during the times following a flood
event upstream of the reservoir.
7. The flood zone is usually drained in a controlled way through use of an outlet works with
an operated gate or ……………

8. The conservation pool is used to stock up water temporarily for ……………
9. The top of the conservation pool performs as a guide, target, or …………… for operators.
10 Water supply allocation is the execution of a permit system and adjudication of ……………
11. …………… flow programming might also be suitable as this is an competent form of LP
which can be used to symbolize a network of nodes and links similar to a reservoir/water
demand network.

12. It is easy to discharge …………… from an upstream reservoir to a downstream reservoir
but not the other way around.
13. The purpose for reservoirs in parallel should be to …………… storage depletions among
the two.

52 LOVELY PROFESSIONAL UNIVERSITY